large_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini.png

medium_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini.png

small_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini.png

thumbnail_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini.png

Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini.png

The DITRA Mini Street Light Controller is designed for managing and diagnosing street lighting systems. It controls starters and auxiliary modules within the DITRA system and transmits data to a central server. Additionally, it supports the control of a single group of luminaires.For communication with DITRA devices, the controller uses an RS-485 interface, while data transfer to the DITRA server is carried out via GSM, 2G, 4G, or NB-IoT mobile networks. A built-in GPS module provides time synchronization and geo-location capabilities.Remote management is supported through the DITRA software platform.The device is intended for direct installation inside lighting control cabinets. Alternatively, it can be mounted separately or connected directly to luminaires through a wired interface.

large_CORE MINI, Daylight Sensor, ArchiCORE MINI.png

medium_CORE MINI, Daylight Sensor, ArchiCORE MINI.png

small_CORE MINI, Daylight Sensor, ArchiCORE MINI.png

thumbnail_CORE MINI, Daylight Sensor, ArchiCORE MINI.png

CORE MINI, Daylight Sensor, ArchiCORE MINI.png

large_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini 2.webp

medium_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini 2.webp

small_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini 2.webp

thumbnail_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini 2.webp

Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini 2.webp

large_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini.webp

medium_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini.webp

small_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini.webp

thumbnail_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini.webp

Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, CORE MIN, ArchiCORE MINI Mini.webp

Street Light Controller DITRA CORE MINI, Wire, 2G, 1 relay, 1 input, RS, GPS

Street Light Controller DITRA CORE MINI, Wire, 2G/4G, 1 relay, 1 input, RS, GPS, Region: E

Street Light Controller DITRA CORE MINI, Wire, 2G/4G, 1 relay, 1 input, RS, GPS, Region: A

Street Light Controller DITRA CORE MINI, Wire, NB-IoT, 1 relay, 1 input, RS, GPS

Ultra-compact Segment Controller for Street Lighting 

Street + City

Mechanical

Power & Electrical

Environment

Inputs/ Outputs

Interfaces and Protocols

Configuration/ Indication

Package Contents

DITRA CORE MINI

large_DITRA CORE Light Scheme.png

medium_DITRA CORE Light Scheme.png

small_DITRA CORE Light Scheme.png

thumbnail_DITRA CORE Light Scheme.png

DITRA CORE Light Scheme.png

large_CORE LIGHT_dev.png

medium_CORE LIGHT_dev.png

small_CORE LIGHT_dev.png

thumbnail_CORE LIGHT_dev.png

CORE LIGHT_dev.png

The DITRA CORE LIGHT Street Light Controller is intended for remote monitoring and management of street lighting systems.For two-way communication with external devices and meters, the DITRA CORE LIGHT utilizes RS-485 interfaces. It connects to the DITRA server via a 2G cellular network.The controller operates on either 110/220 V AC or 9-36 V DC power supply.Remote configuration is supported through the DITRA control platform, as well as locally via DIP switches on the device.Designed for installation on a DIN rail, it fits seamlessly into lighting control cabinets.

large_DITRA PRO LIGHT, DITRA DALI, DITRA LITELINE, DITRA PLX.png

medium_DITRA PRO LIGHT, DITRA DALI, DITRA LITELINE, DITRA PLX.png

small_DITRA PRO LIGHT, DITRA DALI, DITRA LITELINE, DITRA PLX.png

thumbnail_DITRA PRO LIGHT, DITRA DALI, DITRA LITELINE, DITRA PLX.png

DITRA PRO LIGHT, DITRA DALI, DITRA LITELINE, DITRA PLX.png

large_CORE LIGHT_dev.webp

medium_CORE LIGHT_dev.webp

small_CORE LIGHT_dev.webp

thumbnail_CORE LIGHT_dev.webp

CORE LIGHT_dev.webp

large_CORE LIGHT_dev2.webp

medium_CORE LIGHT_dev2.webp

small_CORE LIGHT_dev2.webp

thumbnail_CORE LIGHT_dev2.webp

CORE LIGHT_dev2.webp

Street Light Controller DITRA CORE LIGHT, AC, 2G, 2 relays, 3 inputs, RS

Street Light Controller DITRA CORE LIGHT, DC, 2G, 2 relays, 3 inputs, RS

Small Segment Controller for Street Lighting

Inputs / Outputs

Configuration / Indication

DITRA CORE LIGHT

large_CORE PRO_dev.png

medium_CORE PRO_dev.png

small_CORE PRO_dev.png

thumbnail_CORE PRO_dev.png

CORE PRO_dev.png

The Core of Smart Street Lighting Control The DITRA CORE PRO Controller is an advanced solution for remote monitoring and management of lighting systems. Tailored for modern urban infrastructure, it ensures secure two-way communication and seamless integration with smart city technologies, enabling efficient lighting control from any location.Acting as the central hub of the DITRA control system, the DITRA CORE PRO Controller monitors and manages electrical components within lighting control cabinets, including magnetic starters and compatible accessories.It supports RS-485 and CAN interfaces for data exchange with connected devices and meters, while 2G cellular communication ensures reliable connectivity to the DITRA server.The controller is designed to operate on 110/220 V AC or 9-36 V DC, providing flexible power supply options.Configuration is simple and can be performed remotely via the DITRA software platform or locally using DIP switches on the device.Compact and DIN rail-mountable, the DITRA CORE PRO Controller is built for easy integration into lighting control cabinets, delivering both performance and reliability.

large_DITRA CORE PRO, CORE PRO-2, MultiCONNECT, ArchiCORE.png

medium_DITRA CORE PRO, CORE PRO-2, MultiCONNECT, ArchiCORE.png

small_DITRA CORE PRO, CORE PRO-2, MultiCONNECT, ArchiCORE.png

thumbnail_DITRA CORE PRO, CORE PRO-2, MultiCONNECT, ArchiCORE.png

DITRA CORE PRO, CORE PRO-2, MultiCONNECT, ArchiCORE.png

large_CORE PRO_dev.webp

medium_CORE PRO_dev.webp

small_CORE PRO_dev.webp

thumbnail_CORE PRO_dev.webp

CORE PRO_dev.webp

large_CORE PRO new.webp

medium_CORE PRO new.webp

small_CORE PRO new.webp

thumbnail_CORE PRO new.webp

CORE PRO new.webp

Street Light Controller DITRA CORE PRO, AC, 2G, 4 relays, 7 inputs, RS, CAN

Street Light Controller DITRA CORE PRO, DC, 2G, 4 relays, 7 inputs, RS, CAN

Mid-Sized Segment Controller for Street Lighting

DITRA CORE PRO

large_SN wire.png

medium_SN wire.png

small_SN wire.png

thumbnail_SN wire.png

SN wire.png

large_Wire LiteLINE Node.png

medium_Wire LiteLINE Node.png

small_Wire LiteLINE Node.png

thumbnail_Wire LiteLINE Node.png

Wire LiteLINE Node.png

The Wire LiteLINE Node is a wired PLC (Power Line Communication) control and dimming module designed for managing a single luminaire or a group of luminaires.It is fully compatible with third-party motion sensors.The Wire LiteLINE Node supports multiple interfaces, including DALI, DALI 2.0, PWM, 1-10V, and 0-10V, as well as independent load control (on/off).Operating on a voltage range of 110-230 V, the device supports luminaires with power ratings of up to 1000 W.Control is provided individually through the DITRA CORE PRO, PRO-2, or LIGHT Central Gateways or via DITRA LiteLINE over 110-230 V power lines. LiteLINE technology operates at a frequency of 132.5 kHz, in compliance with CENELEC EN 50065-1 (band-C) standards.The unit is designed for flexible installation inside a luminaire, within its housing, or inside a lighting pole using wired connections. It also features an IP68 rating for dust and moisture protection.

large_LiteLine Node .png

medium_LiteLine Node .png

small_LiteLine Node .png

thumbnail_LiteLine Node .png

LiteLine Node .png

large_Wire-LiteLINE-Node.webp

medium_Wire-LiteLINE-Node.webp

small_Wire-LiteLINE-Node.webp

thumbnail_Wire-LiteLINE-Node.webp

Wire-LiteLINE-Node.webp

Wire LiteLINE Node, load switch, 0-10V/PWM/DALI/DALI 2.0, acelerometer, load 250 W

Wire LiteLINE Node, load switch, 0-10V/PWM/DALI/DALI 2.0, acelerometer, load 800 W

Wire LiteLINE Node, load switch, 0-10V/PWM/DALI/DALI 2.0, load 250 W

Wire LiteLINE Node, load switch, 0-10V/PWM/DALI/DALI 2.0, load 800 W

Wire LiteLINE Node, load switch, 0-10V/PWM, load 250 W

Wire LiteLINE Node, load switch, 0-10V/PWM, load 800 W

Wire LiteLINE Node, 0-10V/PWM, load 250 W

Wire LiteLINE Node, 0-10V/PWM, load 800 W

Pole-mounted outdoor streetlight luminaire controller with wired connection for Power Line Communication (PLC).

Wire LiteLINE Node

large_LiWAVE Node CS wire.png

medium_LiWAVE Node CS wire.png

small_LiWAVE Node CS wire.png

thumbnail_LiWAVE Node CS wire.png

LiWAVE Node CS wire.png

large_Wire LiWAVE Node.png

medium_Wire LiWAVE Node.png

small_Wire LiWAVE Node.png

thumbnail_Wire LiWAVE Node.png

Wire LiWAVE Node.png

Wire LiWAVE Node is a module for wireless luminaire control via radio communication. It is designed for individual control, diagnostics, and dimming.This individual control module is part of the LiWAVE wireless lighting management system (868/915 MHz) and can be connected to the system through a wired interface. It supports individual control of lighting systems and operates on both 868 MHz and 915 MHz frequency bands. With the LiWAVE system, users can efficiently manage their lighting network wirelessly, eliminating the need for additional wiring. The device is designed for quick installation and can be mounted in various locations.The module supports DALI, DALI 2.0, PWM, 1-10V, and 0-10V interfaces, along with individual load control (on/off). Certain versions also come equipped with a GPS receiver for enhanced functionality.Wire LiWAVE Node is configured and controlled via an 800-950 MHz radio channel through DITRA Base Stations.The device is intended for installation inside a lighting fixture housing and connects via a wired interface.

large_LiWAVE Node Dimensions.png

medium_LiWAVE Node Dimensions.png

small_LiWAVE Node Dimensions.png

thumbnail_LiWAVE Node Dimensions.png

LiWAVE Node Dimensions.png

large_Wire-LiWAVE-Node.webp

medium_Wire-LiWAVE-Node.webp

small_Wire-LiWAVE-Node.webp

thumbnail_Wire-LiWAVE-Node.webp

Wire-LiWAVE-Node.webp

Wire LiWAVE Node, load switch, 0-10V/PWM/DALI/DALI 2.0, GPS, acelerometer, light sensor, Region: E

Wire LiWAVE Node, load switch, 0-10V/PWM/DALI/DALI 2.0, GPS, acelerometer, light sensor, Region: A

Wire LiWAVE Node, load switch, 0-10V/PWM/DALI/DALI 2.0, light sensor, Region: E

Wire LiWAVE Node, load switch, 0-10V/PWM/DALI/DALI 2.0, light sensor, Region: A

Wire LiWAVE Node, load switch, 0-10V/PWM, light sensor, Region: E

Wire LiWAVE Node, load switch, 0-10V/PWM, light sensor, Region: A

Wire LiWAVE Node, 0-10V/PWM, Region: E

Wire LiWAVE Node, 0-10V/PWM, Region: A

LiWAVE wireless (868/915 MHz) street light luminaire controller with wired connection support

Wire LiWAVE Node

large_Wire Node Connection.png

medium_Wire Node Connection.png

small_Wire Node Connection.png

thumbnail_Wire Node Connection.png

Wire Node Connection.png

large_Wire Node 2.png

medium_Wire Node 2.png

small_Wire Node 2.png

thumbnail_Wire Node 2.png

Wire Node 2.png

Wire GSM Node is a wired street light controller that supports individual luminaire control, diagnostics, and dimming via wireless 2G/4G/NB-IoT cellular networks.It is compatible with multiple luminaire control interfaces, including DALI, DALI 2.0, PWM, 1-10V, and 0-10V. Data exchange between the device and the server is carried out through cellular networks, ensuring reliable communication.The unit features a built-in GPS receiver for geo-positioning, internal clock synchronization, and an accelerometer for detecting vibration, acceleration, and tilt. It can be controlled by an integrated light sensor or a third-party sensor.Powered by 110/220 V, the Wire GSM Node supports luminaires with power ratings up to 1000 W.Configuration is done directly through Ditra software.Designed for mounting directly on lighting poles or luminaires, the Wire GSM Node offers IP66-rated dust and water resistance, ensuring durability in outdoor environments. Installation is performed via wired connections.

large_Wire Node Dimensions.png

medium_Wire Node Dimensions.png

small_Wire Node Dimensions.png

thumbnail_Wire Node Dimensions.png

Wire Node Dimensions.png

large_Wire Node 1.webp

medium_Wire Node 1.webp

small_Wire Node 1.webp

thumbnail_Wire Node 1.webp

Wire Node 1.webp

large_Wire Node 2.webp

medium_Wire Node 2.webp

small_Wire Node 2.webp

thumbnail_Wire Node 2.webp

Wire Node 2.webp

Wire GSM Node, 2G, load switch 0-10V/PWM/DALI/DALI 2.0, GPS, accelerometer

Wire GSM Node, 2G, load switch, 0-10V/PWM/DALI/DALI 2.0

Wire GSM Node, 2G, load switch, 0-10V/PWM

Wire GSM Node, 2G, 0-10V/PWM

Wire GSM Node, 2G/4G, load switch, 0-10V/PWM/DALI/DALI 2.0, GPS, accelerometer, Region: E

Wire GSM Node, 2G/4G, load switch, 0-10V/PWM/DALI/DALI 2.0, GPS, accelerometer, Region: A

Wire GSM Node, 2G/4G, load switch, 0-10V/PWM/DALI/DALI 2.0, Region: E

Wire GSM Node, 2G/4G, load switch, 0-10V/PWM/DALI/DALI 2.0, Region: A

Wire GSM Node, 2G/4G, load switch, 0-10V/PWM, Region: E

Wire GSM Node, 2G/4G, load switch, 0-10V/PWM, Region: A

Wire GSM Node, 2G/4G, 0-10V/PWM, Region: E

Wire GSM Node, 2G/4G, 0-10V/PWM, Region: A

Wire GSM Node, NB-IoT, load switch, 0-10V/PWM/DALI/DALI 2.0, GPS, accelerometer

Wire GSM Node, NB-IoT, load switch, 0-10V/PWM/DALI/DALI 2.0

Wire GSM Node, NB-IoT, load switch, 0-10V/PWM

Wire GSM Node, NB-IoT, 0-10V/PWM

2G/4G/NB-IoT Street Light Luminaire Controller with Wired Connectivity

Wire GSM Node

medium_Nema LiteLINE Node Connection.png

small_Nema LiteLINE Node Connection.png

thumbnail_Nema LiteLINE Node Connection.png

Nema LiteLINE Node Connection.png

NEMA LiteLINE Node is a module designed for individual control, diagnostics, and dimming of luminaires.NEMA LiteLINE Node functions as a PLC (Power Line Communication) control and dimming module, suitable for managing a single luminaire or a group of luminaires.NEMA LiteLINE Node is compatible with third-party motion sensors.It supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces, and offers individual load control (on/off).The unit operates on 110-230 V, supports luminaires with power ratings up to 1000 W.NEMA LiteLINE Node is managed individually through Central Gateway DITRA CORE PRO, PRO-2, LIGHT and Ditra LiteLINE via 110-230 V power lines. LiteLINE technology operates within the 132.5 kHz frequency range, complying with CENELEC EN 50065-1 (band-C).The device is designed for installation on luminaires using a NEMA socket and features an IP66 rating for dust and moisture protection.

PLC (Power Line Communication) NEMA Street Light Luminaire Controller

NEMA LiteLINE Node

DITRA CORE MINI

DITRA CORE LIGHT

DITRA CORE PRO

Wire LiteLINE Node

Wire LiWAVE Node

Wire GSM Node

NEMA LiteLINE Node

NEMA LiWAVE Node

Screw LiteLINE Node

Wire LoRa Node

NEMA LoRa Node

DITRA PowerTrack Module

LoRa Node (Zhaga-type connector)

GSM Node (Zhaga-type connector)

LiWAVE Node (Zhaga-type connector)

DITRA SOL

DITRA DALI

DITRA LiteLINE

DITRA LiWAVE

DITRA LiWAVE Base Station

DITRA LiWAVE Base Station Lite

DITRA IR Temperature Sensor

DITRA Luminance Sensor

DITRA Meteo Sensor

DITRA Wire Daylight Sensor

DITRA Traffic Monitoring Sensor

DITRA Smart Microwave Motion Sensor

DITRA Smart Infrared Motion Sensor

DITRA PLX

DITRA VoltEdge

DITRA MultiConnect

DITRA HighVoltRelay

DITRA PulseProtect-3

DITRA PowerTrack

NEMA GSM Node

DITRA PulseProtect

DITRA ArchiCORE MEDIA

DITRA CORE PRO-2

DITRA ArchiCORE

DITRA ArchiCORE Node