small_Converters category.png

thumbnail_Converters category.png

Converters category.png

Architecture + Facade

Entertainment

Converters

small_Transceiver category.webp

thumbnail_Transceiver category.webp

Transceiver category.webp

Transcievers

small_Splitter category.webp

thumbnail_Splitter category.webp

Splitter category.webp

Splitters

small_Relay Switcher category.png

thumbnail_Relay Switcher category.png

Relay Switcher category.png

Relay Switches

small_LED driver category.png

thumbnail_LED driver category.png

LED driver category.png

LED Drivers

small_img-products-05.webp

thumbnail_img-products-05.webp

img-products-05.webp

Pixel Strip Drivers

small_Dimmer category.png

thumbnail_Dimmer category.png

Dimmer category.png

Dimmers

small_Repeater category.png

thumbnail_Repeater category.png

Repeater category.png

Repeaters

large_Splitter Prime connection scheme.png

medium_Splitter Prime connection scheme.png

small_Splitter Prime connection scheme.png

thumbnail_Splitter Prime connection scheme.png

Splitter Prime connection scheme.png

large_Ресурс 96 (1).png

medium_Ресурс 96 (1).png

small_Ресурс 96 (1).png

thumbnail_Ресурс 96 (1).png

Splitter Prime.png

The Splitter Prime is a professional 1- or 2-channel DMX512 signal distributor designed for reliable control of lighting systems using the DMX512 standard. It supports DMX512 and RDM (ANSI E1.20) protocols, operating with either 1 or 2 inputs to feed 5 or 10 outputs. Connection options include XLR (3-pin/5-pin) or etherCON. The unit features intelligent indication for DMX512 signal presence, active data transmission, and RDM activity, along with an RDM filtering function via a dedicated switch. Additional DMX Thru ports allow flexible patching, while automatic mode detection enables seamless switching between single and dual input operation. The Splitter Prime also supports DMX line redundancy for added system reliability. Housed in a compact 1U 19-inch rack-mount chassis with just 110 mm depth, it is suitable for indoor or covered outdoor environments.

large_Splitter Prime dimensions.png

medium_Splitter Prime dimensions.png

small_Splitter Prime dimensions.png

thumbnail_Splitter Prime dimensions.png

Splitter Prime dimensions.png

large_Splitter Prime.webp

medium_Splitter Prime.webp

small_Splitter Prime.webp

thumbnail_Splitter Prime.webp

Splitter Prime.webp

large_Splitter-Prime_dev1.webp

medium_Splitter-Prime_dev1.webp

small_Splitter-Prime_dev1.webp

thumbnail_Splitter-Prime_dev1.webp

Splitter-Prime_dev1.webp

Prime Series is special portfolio of 19'' rackmounted (or clampmounted) professional DMX transceivers, DMX to ArtNet/sACN converters with fiber optic ports available pro switches, hybrids and splitters in small depth lightweight metal housing. From 2 to 8 ports per each device (up to 16 ports in 2unit Prime Deluxe series). Natural heat convection. All DMX ports are bidirectional i.e. may be configured as inputs or outputs. All ports are galvanically isolated. UltraStart Technology guarantees ready device in less than 3 seconds after power supply. RDM support. Some devices feature PoE power supply (802.15f).

Prime

Rack-mount DMX512 splitter/booster with 1 or 2 inputs, up to 10 outputs, DMX Thru ports, RDM support, and intelligent signal monitoring

Mechanical

Power & Electrical

Environment

Control / Data Connections

Inputs / Outputs

Configuration / Indication

Package Contents

Splitter Prime

Splitter Selective Prime connection scheme

large_Splitter Selective Prime connection scheme.png

medium_Splitter Selective Prime connection scheme.png

small_Splitter Selective Prime connection scheme.png

thumbnail_Splitter Selective Prime connection scheme.png

Splitter Selective Prime connection scheme.png

large_Splitter Selective Prime.png

medium_Splitter Selective Prime.png

small_Splitter Selective Prime.png

thumbnail_Splitter Selective Prime.png

Splitter Selective Prime.png

Splitter Selective Prime is a professional-grade DMX512 splitter and booster with full RDM (ANSI E1.20) support, designed for demanding lighting control environments. The unit features two DMX inputs and nine optically isolated outputs, supporting both single- and dual-universe operation with per-port input source selection.In single-input mode, the unit distributes the incoming DMX signal from input A to up to ten outputs (A + 9). In dual-input mode, DMX inputs A and B can each route signals to selected output ports independently, allowing flexible distribution of two separate universes. Each port’s assignment is user-selectable.Intelligent status indicators provide real-time feedback on DMX activity and RDM presence for each input, while the built-in RDM filter prevents signal collisions on shared networks. The unit also supports pass-through (THRU) for input chaining.Designed in a rugged 1U metal enclosure for 19” rack mounting (110 mm deep), Splitter Selective Prime offers robust electrical protection with 5kV galvanic isolation and TVS diodes on all ports. The fanless, sealed housing meets IP54 protection for use in clean or covered environments.

large_Splitter Selective Prime dimensions.png

medium_Splitter Selective Prime dimensions.png

small_Splitter Selective Prime dimensions.png

thumbnail_Splitter Selective Prime dimensions.png

Splitter Selective Prime dimensions.png

large_Splitter Selective Prime1.webp

medium_Splitter Selective Prime1.webp

small_Splitter Selective Prime1.webp

thumbnail_Splitter Selective Prime1.webp

Splitter Selective Prime1.webp

large_Splitter Selective Prime DITRA entertainment lighting 2@330x.webp

medium_Splitter Selective Prime DITRA entertainment lighting 2@330x.webp

small_Splitter Selective Prime DITRA entertainment lighting 2@330x.webp

thumbnail_Splitter Selective Prime DITRA entertainment lighting 2@330x.webp

Splitter Selective Prime DITRA entertainment lighting 2@330x.webp

large_Splitter Selective Prime.webp

medium_Splitter Selective Prime.webp

small_Splitter Selective Prime.webp

thumbnail_Splitter Selective Prime.webp

Splitter Selective Prime.webp

Advanced Dual-Channel Rack-Mount DMX Splitter with RDM Filtering and Per-Port Signal Routing

Splitter Selective Prime

large_Splitter Duo Prime connection.png

medium_Splitter Duo Prime connection.png

small_Splitter Duo Prime connection.png

thumbnail_Splitter Duo Prime connection.png

Splitter Duo Prime connection.png

large_Splitter Duo Prime.png

medium_Splitter Duo Prime.png

small_Splitter Duo Prime.png

thumbnail_Splitter Duo Prime.png

Splitter Duo Prime.png

Splitter Duo Prime is a professional two-channel DMX512 signal splitter designed for efficient control of lighting equipment operating on the DMX512 standard. It supports transmission of DMX512 and RDM (ANSI E1.20) protocols from one or two inputs to five or ten outputs, using XLR (5-pin or 3-pin) or EtherCON connectors.The unit features intelligent indication to display DMX512 signal presence, active data transmission, and detection of RDM (ANSI E1.20) interface signals. A dedicated switch enables RDM protocol filtering when required, and several additional DMX THRU ports are provided for extended connectivity.Splitter Duo Prime automatically detects its operating mode (single or dual input) and can operate in DMX line redundancy mode for increased reliability. Its 19-inch rack-mount housing takes up only 1U of space, with a depth of just 110 mm, making it compact and lightweight for flexible installation — including on trusses or in covered venues. Designed for use in positive temperatures, it is suitable for both indoor and sheltered outdoor applications.

large_Splitter Duo Prime dimensions.png

medium_Splitter Duo Prime dimensions.png

small_Splitter Duo Prime dimensions.png

thumbnail_Splitter Duo Prime dimensions.png

Splitter Duo Prime dimensions.png

large_Splitter Duo Prime.webp

medium_Splitter Duo Prime.webp

small_Splitter Duo Prime.webp

thumbnail_Splitter Duo Prime.webp

Splitter Duo Prime.webp

Dual-channel DMX512 splitter with RDM support, featuring 2 inputs, up to 10 outputs, 3 pass-through DMX THRU ports, redundancy mode, and intelligent signal indication

Splitter Duo Prime

Wireless Splitter Prime connection scheme

large_Wireless Splitter Prime connection scheme.png

medium_Wireless Splitter Prime connection scheme.png

small_Wireless Splitter Prime connection scheme.png

thumbnail_Wireless Splitter Prime connection scheme.png

Wireless Splitter Prime connection scheme.png

large_Wireless-Splitter-Prime_dev1.png

medium_Wireless-Splitter-Prime_dev1.png

small_Wireless-Splitter-Prime_dev1.png

thumbnail_Wireless-Splitter-Prime_dev1.png

Wireless-Splitter-Prime_dev1.png

Splitter Wireless Prime is a high-performance rack-mountable DMX splitter designed for use in large lighting networks where wireless reception and signal distribution are required. Built with DITRA’s BeDMX wireless technology, it allows signal reception from up to two independent wireless sources and distributes them through 5 or 10 optically isolated DMX outputs, depending on model.BeDMX operates in the 2.4 GHz ISM band using Bluetooth 5.0 with Adaptive Frequency Hopping (AFH), providing bidirectional communication and exceptional resistance to wireless interference (1600 hops/sec), with transmission ranges of up to 1500 meters using high-gain antennas.Splitter Wireless Prime supports DMX512 and RDM (ANSI E1.20) and can operate in single-channel or dual-channel mode. In single-channel mode, a single DMX input (wired or wireless) is distributed to up to 9 output ports. In dual-channel mode, each DMX input (A and B) — including one or two BeDMX streams — can be routed to different output groups independently, with smart input priority and backup logic. All ports are galvanically isolated and protected with TVS diodes for overvoltage protection.Built for touring and rental applications, the unit features no buttons, smart mode detection, and status indicators for wireless signal, DMX activity, and RDM presence on each line. Input options include EtherCON or XLR (3 or 5 pin) as specified per project.The device is housed in a 1U 19-inch rack-mountable enclosure (depth 11 cm), protected to IP54, and operates reliably from 100–305 V AC. Passive, fanless cooling ensures silent, dust-resistant operation even in challenging environments.

large_Wireless Splitter Prime dimensions.png

medium_Wireless Splitter Prime dimensions.png

small_Wireless Splitter Prime dimensions.png

thumbnail_Wireless Splitter Prime dimensions.png

Wireless Splitter Prime dimensions.png

large_Wireless-Splitter-Prime_dev1.webp

medium_Wireless-Splitter-Prime_dev1.webp

small_Wireless-Splitter-Prime_dev1.webp

thumbnail_Wireless-Splitter-Prime_dev1.webp

Wireless-Splitter-Prime_dev1.webp

large_Wireless-Splitter-Prime_dev.webp

medium_Wireless-Splitter-Prime_dev.webp

small_Wireless-Splitter-Prime_dev.webp

thumbnail_Wireless-Splitter-Prime_dev.webp

Wireless-Splitter-Prime_dev.webp

Rack-mounted wireless DMX splitter with up to 10 galvanically isolated outputs, BeDMX reception, RDM support, and automatic input switching

Splitter Wireless Prime

large_Splitter Duo Guard connection scheme.png

medium_Splitter Duo Guard connection scheme.png

small_Splitter Duo Guard connection scheme.png

thumbnail_Splitter Duo Guard connection scheme.png

Splitter Duo Guard connection scheme.png

large_Splitter-Duo-Guard_dev1.png

medium_Splitter-Duo-Guard_dev1.png

small_Splitter-Duo-Guard_dev1.png

thumbnail_Splitter-Duo-Guard_dev1.png

Splitter-Duo-Guard_dev1.png

Splitter Duo Guard is a compact and reliable DMX splitter designed for indoor professional lighting systems. Featuring 2 DMX inputs and 4 galvanically isolated DMX outputs, the device can operate as a 1-to-5 splitter or as two independent 1-to-2 splitters, offering maximum versatility and built-in input redundancy.Fully compatible with DMX512 and RDM (ANSI E1.20) protocols, the Splitter Duo Guard ensures bidirectional communication for fixture monitoring and remote configuration. All ports are protected by galvanic isolation, providing robust electrical protection and signal integrity even in complex setups.The unit supports automatic input failover, ensuring seamless operation even if one source becomes unavailable. Connection status and data activity are indicated by onboard status LEDs.Powered from 100–250 V AC mains, the unit consumes less than 5 W and features a fanless, passively cooled IP54-rated enclosure made of vandal-resistant metal. Its surface or truss mounting capability makes it suitable for installation in control rooms, auditoriums, museums, or behind panels in indoor architectural environments.

large_Splitter Duo Guard dimensions.png

medium_Splitter Duo Guard dimensions.png

small_Splitter Duo Guard dimensions.png

thumbnail_Splitter Duo Guard dimensions.png

Splitter Duo Guard dimensions.png

large_Splitter-Duo-Guard_dev1.webp

medium_Splitter-Duo-Guard_dev1.webp

small_Splitter-Duo-Guard_dev1.webp

thumbnail_Splitter-Duo-Guard_dev1.webp

Splitter-Duo-Guard_dev1.webp

large_Splitter-Duo-Guard_dev.webp

medium_Splitter-Duo-Guard_dev.webp

small_Splitter-Duo-Guard_dev.webp

thumbnail_Splitter-Duo-Guard_dev.webp

Splitter-Duo-Guard_dev.webp

Guard series has been specifically designed for adverse environments, hardly accessible and excessively dusty indoor locations. Guard series converters have proved their excellent resistance to mechanical impact and any kind of stage smoke. These series include wireless DMX or ArtNet/sACN/RDM transceivers/receivers, bidirectional DMX to ArtNet/sACN converters, as well as hybrid CrossGates (wireless DMX/ArtNet/sACN transmitter/receivers). Natural heat convection and moulded 3mm space effective thick metal case with reinforced connectors provide high ingress protection (IP44). All ports are bidirectional i.e. may be configured as inputs or outputs. All DMX ports are galvanically isolated. UltraStart Technology guarantees ready device in less than 3 seconds after power supply. Different wall and clamp mounting options. Some devices feature PoE power supply (802.15f).

Guard

Indoor 2-input DMX splitter with 4 optically isolated outputs, input backup, and RDM support

Splitter Duo Guard

large_Splitter Duo Shield connection scheme.png

medium_Splitter Duo Shield connection scheme.png

small_Splitter Duo Shield connection scheme.png

thumbnail_Splitter Duo Shield connection scheme.png

Splitter Duo Shield connection scheme.png

large_Splitter Duo Shield3.png

medium_Splitter Duo Shield3.png

small_Splitter Duo Shield3.png

thumbnail_Splitter Duo Shield3.png

Splitter Duo Shield3.png

Splitter DUO Shield is a robust 2-channel DMX splitter designed for professional outdoor lighting systems that require flexibility, reliability, and intelligent control. Built in a durable IP66-rated aluminum enclosure, it ensures stable performance even in harsh weather conditions, making it ideal for both permanent and temporary installations.This unit supports DMX512, RDM (ANSI E1.20), ArtNet (1–4), and sACN protocols. It allows for flexible signal routing — from 1, 2, or 3 DMX inputs to 2, 4, or 5 outputs — depending on the project needs. The two integrated Ethernet ports ensure stable and redundant network connections, enabling integration into complex lighting systems.The device is powered via 110–220V AC or 9–36V DC, making it perfect for architectural or pixel lighting scenarios. With intelligent status indicators and galvanic isolation on all DMX ports, the Splitter DUO Shield ensures smooth operation, diagnostics, and signal integrity.Configuration is quick and user-friendly thanks to a built-in web interface, while the fanless, sealed design guarantees silent and maintenance-free performance in any environment.

large_Splitter Duo Shield dimensions.png

medium_Splitter Duo Shield dimensions.png

small_Splitter Duo Shield dimensions.png

Splitter Duo Shield dimensions.png

Professional 2-channel DMX splitter with dual Ethernet, protocol support, and IP66 protection for demanding outdoor installations

Splitter DUO Shield

PROfessional lighting control hardware